Product Details
Description
The STM8S003x value line 8-bit microcontrollers feature 8 Kbytes Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost.
Features
Core
• 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
• Extended instruction set
Memories
• Program memory: 8 Kbytes Flash; data retention 20 years at 55 °C after 100 cycles
• RAM: 1 Kbytes
• Data memory: 128 bytes of true data EEPROM; endurance up to 100 000 write/erase cycles
Clock, reset and supply management
• 2.95 to 5.5 V operating voltage
• Flexible clock control, 4 master clock sources:
- Low power crystal resonator oscillator
- External clock input
- Internal, user-trimmable 16 MHz RC
- Internal low power 128 kHz RC
• Clock security system with clock monitor
• Power management:
- Low power modes (wait, active-halt, halt)
- Switch-off peripheral clocks individually
• Permanently active, low consumption power-on and power-down reset
Interrupt management
• Nested interrupt controller with 32 interrupts
• Up to 27 external interrupts on 6 vectors
Timers
• Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
• 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
• 8-bit basic timer with 8-bit prescaler
• Auto wake-up timer
• Window watchdog and independent watchdog timers
Communications interfaces
• UART with clock output for synchronous operation, Smartcard, IrDA, LIN master mode
• SPI interface up to 8 Mbit/s
• I2C interface up to 400 Kbit/s
Analog to digital converter (ADC)
• 10-bit, ±1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog
I/Os
• Up to 28 I/Os on a 32-pin package including 21 high sink outputs
• Highly robust I/O design, immune against current injection
Development support
• Embedded single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging
Product Description
STMicroelectronics STM8S003K3T6C
MCU STM8 8-Bit -40°C ~ 85°C (TA) FLASH 8KB (8K x 8) STM8S 16MHz 32-LQFP (7x7)
ANSC PART# | ANSC- STM8S003K3T6C |
Part# | STM8S003K3T6C |
Type: | Integrated Circuits(ICs) |
Manufactor | STMicroelectronics |
DC | new |
Package / Case | 32-LQFP |
Supplier Device Package | Tray |
Product Attributes
TYPE | DESCRIPTION |
Category | Integrated Circuits (ICs) |
Embedded | |
Microcontrollers | |
Mfr | STMicroelectronics |
Series | STM8S |
Package | Tray |
Product Status | Active |
DigiKey Programmable | Not Verified |
Core Processor | STM8 |
Core Size | 8-Bit |
Speed | 16MHz |
Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
Number of I/O | 28 |
Program Memory Size | 8KB (8K x 8) |
Program Memory Type | FLASH |
EEPROM Size | 128 x 8 |
RAM Size | 1K x 8 |
Voltage - Supply (Vcc/Vdd) | 2.95V ~ 5.5V |
Data Converters | A/D 4x10b |
Oscillator Type | Internal |
Operating Temperature | -40掳C ~ 85掳C (TA) |
Mounting Type | Surface Mount |
Supplier Device Package | 32-LQFP (7x7) |
Package / Case | 32-LQFP |
Base Product Number | STM8 |
Actual image of the product
Product datasheet
For more information, please download