JDY-10 Bluetooth 4.0 module BLE Bluetooth serial port transparent transmission module compatible with CC2541 slave Bluetooth -10M

Product Descriptions:

Copy the JDY-10 data cloud storage link and download the webpage: http://pan.baidu.com/s/1dFzIb6L

JDY-10M Data Network Disk Link Copy webpage download: Link: https://pan.baidu.com/s/1T3PaxMABOv1CeAyZqGjtlQ Password: oojd

Model: JDY-10 Bluetooth 4.0 Slave Module

Kernel: M0

Communication interface: serial port

Working voltage: 1.9-3.6V

Communication distance: 100 meters (some modules have higher transmission power, and the communication distance is much farther than previous modules)

Working current: 90ua

Suspen mode: 14 uA

Module: Bluetooth 4.0 slave

The JDY-10 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency range of 2.4GHz, modulation mode of GFSK, high transmission power of 8db, and a large transmission distance of 80 meters. It has the characteristics of low power consumption, small size, strong signal, and stable data transmission.

Product Features：

1: Support, iOS mobile data transparency

2: Support low power consumption (standby current can reach several uA)

3: Supports GPIO and UART peripheral interfaces

4: Support AT command operation

5: Can be certified by standards such as FCC/CE

Product application scope：

1: Bluetooth LED lighting

2: Motor adjustment and other products

3: Anti loss alarm and other products

4: Sports, Health, and Medical Care

5: Small household appliances

6: Automotive Electronics

Technical specifications:

Factory default configuration:

Service UUID: FFE0

Feature UUID: FFE1

Serial port baud rate: 115200bps

This module is a serial port transparent transmission module (customizable with 4 PWM outputs and 15 IO input/output ports). Customers who need customization can contact our service

AT instruction set

Users can communicate through a serial port and Bluetooth chip. The serial port uses two signal lines, Tx and Rx, with baud rate support

Holding 24004800960014400192003840057600115200. The default baud rate for serial ports is 115200bps.

Detailed instruction set description

(Note: When issuing the AT command, it is necessary to enter the carriage and wrap the line. The AT command can only take effect when the module is not connected. Once the blue

When the dental module is connected to the device, the Bluetooth module enters data transmission mode

Detailed instruction description

(The AT instruction is case sensitive and ends with a carriage return or line break character:)

1.Get version number:

2. Obtain Bluetooth MAC address:

3. Set Bluetooth name:

4. Settings/Query - Transmission Power:

1.Settings/Query - Serial Port Baud Rate:

2. Settings/Query - Broadcast Interval