Spot infrared tube to tube photoelectric switch infrared sensor QT30CM detection distance quality assurance

Product Descriptions：

Sensing distance: 2-30cm

Induction method: Light speed cutoff (infrared)

Working voltage: DC 5V

Working current: transmitting (20mA) receiving (10mA)

Output mode: High and low level NPN normally open

Output current: 70mA (can directly drive relay)

Launch angle:<5 °

Receiving angle:<10 °

Response time: 2ms

Working temperature: -10 ℃~60 ℃

Working environment: Indoor (not waterproof)

Dimensions: Length 21mm, Width 11mm, Height 6mm

Line length: 30cm

Working life: 50000 hours

Wiring method: Red - Power -5VCC

Black - Negative - GND

Yellow - Output - OUT (NPN)

(i.e. red wire connected to positive pole, black wire connected to ground, yellow (white) wire connected to signal)

Output signal: High and low levels can directly drive the relay

Adding a 1K pull-up resistor between the positive pole and the signal can directly connect to the IO port of the microcontroller