Product Features

Overview: This module belongs to a linear current sensor, designed based on the principle of Hall induction. It is equipped with a precise low bias linear Hall sensor circuit and copper located near the surface of the IC. When the current passes through the copper foil, a magnetic field is generated. The Hall element induces a linear voltage signal based on the magnetic field. After internal amplification, filtering, chopping, and correction circuits, it outputs a voltage proportional to the detected AC or DC current.

Product Applications

It can be applied in the field of motors, load detection and management, switching power supplies, and overcurrent fault protection.

Product wiring diagram

Accuracy range (Ip): It can measure a current of 5A, corresponding to an analog output of 185mV/A; When Ip=0A and no current is detected passing through, the output voltage is vCC/2, which is 2.5V. The calculation formula is VouT=2.5+0.185 * lp

Product Size

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：