Product Performance

Motor power supply voltage: 6.5V-45V

Logic level: The IN pin has a logic level of up to 5.5V

Typical RDS (on): 565mQ

Peak current: 3.6A

Undervoltage lockout: Yes

Overcurrent protection: Yes

Product weight: 6.3g

Product Description

PWM control

Current limit/regulation without inline detection resistor

Hot shutdown

Using it is actually quite simple. Connect the motor to the OUT terminal block. Power supply 6.5-45VDC on VMotor and provide H-bridge input control on IN1 and IN2. You can even input PWM, and the driver chip will do the right thing.

You can use the external resistor Rlim to set the current limit. By default, we weld a~2A current limit on a 30K resistor, but you can remove the resistor and/or weld a resistor on it to change the resistance and limit.

Each order has a fully assembled and tested motor driver that breaks through two 2-pin terminal blocks and a small section of connector. It requires some light welding to connect the joints and wiring terminals, but it is a simple task that can be completed with basic welding equipment.

Product Size

Product Show

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：