Module Parameter

Jogging type: Initial state is low level, touch is high level, no touch is low level

The power supply can be 3.3~5.0V DC

The power indicator light is on the upper left corner

Touch two touch screens, and the two indicator lights below the module will turn red

Both the front and back sides can serve as touch surfaces, replacing traditional touch buttons

4 M2 screw positioning holes for easy installation

Product Introduction

This module is a touch switch module based on touch detection I (CT8224-3). Under normal circumstances, the module outputs a low level: when touching the corresponding position with a finger, the module outputs a high level. The module can be installed on non-metallic materials such as plastic and glass surfaces, and a thin piece of paper (non-metallic) can be covered on the surface of the module. As long as the touch position is correct, it can be made into hidden buttons on walls, desktops, and other places. This module can relieve you of the trouble of conventional press type buttons.

The wiring method between the module and the small power supply is as follows:

Product Size

Product Show

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：