Product Descriptions

Gscoolink GSV6201 is a high-performance, low-power, USB Type-C Alternate Mode DisplayPort 1.4 to HDMI 2.1 converter. By integrating enhanced microcontroller, GSV6201 has created a cost-effective solution that provides time-to-market advantages. The DisplayPort Receiver supports up to 32.4Gbps (HBR3, 4-lane) and HDMI Transmitter supports up to 48Gbps (FRL, 12G4Lane). Integrated Power Delivery 3.0 controller handles Type-C CC interface for USB power management and DisplayPort mode entry. The superior architecture of GSV6201 provides economical smaller footprint solutions using QFN64, targeting applications of Type-C Docking, Type-C dongle and DP to HDMI cable.

Product Features

DisplayPort Receiver Features 

• Compliant with VESA DisplayPort 1.4a

• Compliant with HDCP 2.2/2.3 and HDCP 1.4

• Support HBR3, HBR2, HBR and RBR (8.1/5.4/2.7/1.62 Gbps)

• Flexible 1/2/4 lane Main-Link configuration

• Programmable Adaptive Equalization 

• Support Full-Link Training and No-Link Training

• Support High Dynamic Range (HDR) and Dynamic/Static Metadata

• Support Adaptive Sync/FreeSync

• Support Audio Extraction

• Support Horizontal Blanking Expansion up to 4K@120Hz format

• Support Forward Error Correction (FEC)

• Embedded arbitrary EDID and MCCS

• Support Spread Spectrum Clock (SSC)

HDMI Transmitter Features 

• Compliant with HDMI 2.1, HDMI 2.0b, HDMI 1.4b

• Compliant with HDCP 2.2/2.3 and HDCP 1.4

• Data rate up to 48Gbps (FRL 12Gbps/4 Lane)

• Programmable Voltage Swing, Slew-Rate and

Pre-emphasis

• Support AC-coupling on TMDS

• Support Color Space Converter in HDMI 2.0 mode

• Support HDR (HDR10/HDR10+/Dolby Vision/HLG)

• Support Variable Refresh Rate (VRR)/FreeSync

• Support DSC encoded stream pass-through

• Hardware CEC Engine for Low Level protocol decoding

• 5V tolerance on DDC/HPD/CEC pins

USB Type-C Interface Features 

• USB Power Delivery 3.0 Compliant controller

• 3 Configuration Channels (CC) with built-in Rp/Rd resistors

• Dual Role Power Port (DRP)

• Fast Role Swap

• USB 2.0 full-speed billboard enumeration

Audio Input/Output Features 

• I2S and SPDIF Audio Extraction from HDMI Rx

• I2S/SPDIF Audio Insertion to HDMI Tx

• SPDIF/I2S/HBR/DSD/TDM Format Supported for Audio Extraction and Insertion

• SPDIF to I2S Conversion using single TTL bus in Bi-direction

System Features 

• Embedded internal MCU

• Optional Internal Flash or External pins of Flash QSPI interface

• External 25MHz Crystal required

• Available Pins for UART/Timer/GPIO

• Temperature Sensor Monitoring Circuit

Specifications

Actual product photos

Product Data Book：

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：