Product Descriptions

Gscoolink GSV2712 is a high-performance, low-power 2 Into 1 Out HDMI 2.0/DisplayPort 1.4 to HDMI 2.0 mixedswitch. By integrating enhanced microcontroller based onRISC-V, GSV2712 has created a cost-effective solution thatprovides time-to-market advantages. The DisplayPort

Receiver supports up to 32.4Gbps (HBR3, 4-lane), HDMI Receiver and HDMI Transmitter supports up to 18Gbps (TMDS, 6G/3Lane). With embedded Channel Configuration (CC), Power Delivery (PD) controller and Billboard USB 2.0 controller, GSV2712 can directly map its one receiver to USB Type-C interface, and Alternate DisplayPort for Type-C can be supported for Type-C to HDMI application.The superior architecture of GSV2712 provides economical smaller footprint solutions using QFN88, targeting applications of TV/Monitor/Sound bar/Stream box and KVM.

Product Features

HDMI Receiver Features

• Compliant with HDMI 2.0b, HDMI 1.4b

• Compliant with HDCP 2.2/2.3 and HDCP 1.4 in repeater/receiver mode

• Data rate up to 18Gbps (TMDS 6Gbps/3 Lane)

• Programmable Adaptive Equalization

• Support High Dynamic Range (HDR) and Dynamic/Static Metadata

• Support Variable Refresh Rate (VRR), FreeSync,G-Sync

• Support ALLM

• Support Forward Error Correction (FEC)

• Embedded arbitrary EDID (up to 512 bytes)

• 5V tolerance on DDC/HPD pins

HDMI Transmitter Features

• Compliant with HDMI 2.0b, HDMI 1.4b

• Compliant with HDCP 2.2/2.3 and HDCP 1.4

• Data rate up to 18Gbps (TMDS 6Gbps/3 Lane)

• Programmable Voltage Swing, Slew-Rate and Pre-emphasis

• Support AC-coupling on TMDS input/output

• Support Color Space Converter in TMDS mode

• Support HDR (HDR10/HDR10+/Dolby Vision/HLG)

• Support Variable Refresh Rate (VRR), FreeSync,G-Sync

• Support ALLM

• Hardware CEC Engine for Low Level protocol decoding

• 5V tolerance on DDC/HPD/CEC pins

• Support eARC Rx to I2S/SPDIF audio extraction in HDMI 2.1a

Audio Input/Output Features

• I2S and SPDIF Audio Extraction from HDMI Rx

• I2S and SPDIF Audio Extraction from downstream ARC /eARC

• I2S/SPDIF Audio Insertion to HDMI Tx

• SPDIF/I2S/HBR/DSD/TDM Format Supported for Audio Extraction and Insertion

• SPDIF to I2S Conversion using single Bi-directional TTL bus

System Features

• Optional External MCU (via I2C)/ Internal MCU mode

• Embedded MCU and External Flash

• External pins of Flash QSPI interface

• External 25MHz Crystal required

• Available Pins for UART/Timer/GPIO control from embedded MCU

• Mailbox feature for external MCU access on chip function status

• Temperature Sensor Monitoring Circuit

Specifications

Actual product photos

Product Data Book：

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：