A 100-TQFP package is included. This Microcontroller is mounted using the Surface Mount mounting type. Powered by the 32-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 32MX series components belong to this electrical component. Its program memory size is 512KB 512K x 8. There is a MIPS32® M4K™ Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 100 terminations in total. The part works on a 32-bit basis. An output voltage of 3.3V volts is available for this Microcontroller chip. The Microcontroller chip has YES DMA channels. 512kB memory size belongs to the part. PIC32MX795F512L is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 80MHz, as long as it is operated at a low power consumption. In order for the device to work with the motor, it utilizes the PWM channel YES. On the chip, there are 100 pins that are accessible. A total of 100 pins are present. Devices based on the PIC series of CPUs are embedded in the device. It is built on a PIC core architecture. The device has 6 UART channels. In total, there are 16 channels for the ADC on this board. Devices like this use an 5-channel PWM controller.