Several packaging options are available for convenient transportation, including 16-TSSOP (0.173, 4.40mm Width).Package number Tube is ready for power buffer.Adaptable universalism in a single mout.Here's a typical Buffer, Multiplexer.The op amp buffer is powered by 3V~3.6V voltage.For the output quality to be maintained, 1 x 1:4 channels work together.The system facilitates the input of LVTTL.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.Using "65LVDS105" will give you more solutions for your unique needs.It has 16 terminals.The peak reflow temperature of the material is 260.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.Power buffer pinout starts at 16 pins.This program outputs in LVDS.It is equipped with 16 pins.For mounting on PCBs or other boards, there is a Surface Mount.23mA is the voltage that this power buffer operates on.The operating supply voltage of 3.3V is required for normal operation.The repeter uses a 1-Bit receiver.It dissipates 774mW of power at most.A nominal supply current of 23mA is required for normal use of the splitter.4 outputs can be output by it.