In package PDIP, there is an embedded device. This chip has a total termination count of 14. 5V is the operating supply voltage of the part. It has 14 pins. The mounting method should be Through Hole. This electronic component is classified as TTL/H/L. It's noted that the chip's operating supply voltage is in the range 5V. Taking note of the following additional details: GATED SERIAL INPUTS (A AND B). There is a possibility of delivering voltage at 5V. There are 8 bits in the IC chip. The pin count is 14. Using it below 70°C is recommended. In order to operate the device, the value should not fall below 0°C. It is used under the 5.25V supply voltage. It is used at a voltage greater than 4.75V.