Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 8 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 8-PowerSOIC (0.154, 3.90mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 12V. LM22676 is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at 1.285V volts. In order to operate voltage regulator, 8 pins are required. This voltage regulator 12v should be configured with an output voltage that is at least 1.285V. For switching regulator maximum operation, dc to dc voltage regulator delivers 3A A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 37V. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER® family of electronic voltage regulator 12vs. With a supply voltage of 42V, this harley voltage regulator works. Without external influences, harley voltage regulator consumes 3.4mAA of quiescent current. The dc to dc voltage regulator's minimum supply voltage of 4.5V volts ensures reliable performance. As long as the supply voltage is greater than 42V, the voltage regulator 12v will operate correctly. A dc to dc voltage regulator's frequency of 500kHz is sufficient for maintaining high accuracy.