TPS61026DRCT Overview

For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 10 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 10-VFDFN Exposed Pad package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 600kHz for this voltage regulator 12v. Input voltage 0.9V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 1.2V for the purposes of operation. As part of the TPS61025 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 5.5V volts. The switching regulator operation is carried out by 10 pins. In order for this switching regulator to work properly, the output voltage should be at least 5VV. Switching regulator has a maximum output current of 1.5A A, which is sufficient to meet the requirements of operation. Switching regulators operate at 5.5V supply voltages. There is no external influence on harley voltage regulator as it consumes 25μA A of quiescent current.