Product Descriptions
The MP2120 is an internally compensated 1.5MHz fixed frequency PWM synchronous step-down regulator. MP2120 operates from a 2.7V to 5.5V input and generates an output voltage as low as 0.8V.
The MP2120 integrates an 80mΩ high-side switch and a 60mΩ synchronous rectifier for high efficiency without an external Schottky diode. With peak current mode control and internal compensation, the MP2120 based solution delivers a very compact footprint with a minimum component count.
The MP2120 is available in a small 3mm x 3mm 10-lead QFN package.
Product Features
2.5A Output Current
Input Operation Range: 2.7V to 5.5V
All Ceramic Capacitor Design
Up to 95 PERCENT Efficiency
1.5MHz Fixed Switching Frequency
Adjustable Output from 0.8V to 0.9xVIN
Internal Soft-Start
Frequency Synchronization Input
Power Good Output
Cycle-by-Cycle Current Limiting
Hiccup Short Circuit Protection
Thermal Shutdown
3mm x 3mm 10-lead QFN Package
Product Applications
µP/ASIC/DSP/FPGA Core and I/O Supplies
Printers and LCD TVs
Network and Telecom Equipment
Point of Load Regulators
Product Specification
| Attribute | Attribute value |
| ANSM-Part# | ANSM-MP2120DQ-LF-Z |
| Category | Integrated Circuits (ICs) |
| Power Management (PMIC) | |
| Voltage Regulators - DC DC Switching Regulators | |
| Mfr | - |
| Packaging | Tape & Reel (TR) |
| Part Status | Not For New Designs |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 2.7V |
| Voltage - Input (Max) | 5.5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Voltage - Output (Max) | 4.95V |
| Current - Output | 2.5A |
| Frequency - Switching | 1.5MHz |
| Synchronous Rectifier | YES |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Supplier Device Package | 10-QFN (3x3) |
| Base Product Number | MP2120 |
Product Photos
For more product information, please download the PDF
