Product Descriptions
The QorIQ mid-performance tier, which includes the P2020 (dual-core processor) and P2010 (single-core processor) communications processors, delivers high single-threaded performance per watt for a wide variety of applications in the networking, telecom, military and industrial markets. These P2 devices deliver dual- and single-core frequencies up to 1.2 GHz on a 45 nm technology low-power platform.
The QorIQ P2020 and P2010 dual- and single-core products are pin compatible with the QorIQ P1 family devices in the valueperformance tier, offering four interchangeable cost-effective solutions. Scaling from a singlecore processor at 533 MHz (P1011) to a dualcore processor at 1.2 GHz (P2020), the two tiers of devices together deliver an impressive 4.5x aggregate frequency range within the same pinout.
The P2010 and P2020 devices are software compatible, sharing the e500 Power Architecture® core and peripherals, as well as being fully software compatible with the existing PowerQUICC processors. This enables customers to create a product with multiple performance points from a single board design. The P2020 and P1020 dual-core processors support symmetric and asymmetric multiprocessing, enabling customers to scale performance through either thread-level or application-level parallelism.
Product Features
• Dual (P2020) or single (P2010) highperformance Power Architecture e500 cores
36-bit physical addressing
Double-precision floating-point support
32 KB L1 instruction cache and 32 KB L1 data cache for each core
800 MHz to 1.2 GHz clock frequency
• 512 KB L2 cache with ECC. Also configurable as SRAM and stashing memory.
• Three 10/100/1000 Mb/s enhanced threespeed Ethernet controllers
TCP/IP acceleration and classification capabilities
IEEE 1588 support
Lossless flow control
R/G/MII, R/TBI, SGMII
FIFO interfaces
• High-speed interfaces supporting various multiplexing options
Four SerDes to 3.125 GHz multiplexed across controllers
Three PCI Express interfaces
Two Serial RapidIO interfaces
Two SGMII interfaces
• High-Speed USB controller (USB 2.0)
Host and device support
Enhanced host controller interface
ULPI interface to PHY
• Enhanced secure digital host controller(SD/MMC)
Product Specification
| Attribute | Attribute value |
| ANSM-Part# | ANSM-P2020NSE2MHC |
| Category | Integrated Circuits (ICs) |
| Embedded | |
| Microprocessors | |
| Manufacturer | - |
| Series | QorIQ P2 |
| Packaging | Tray |
| Part Status | Obsolete |
| Core Processor | PowerPC e500v2 |
| Number of Cores/Bus Width | 2 Core, 32-Bit |
| Speed | 1.2GHz |
| Co-Processors/DSP | Security; SEC 3.3 |
| RAM Controllers | DDR2, DDR3 |
| Graphics Acceleration | No |
| Ethernet | 10/100/1000Mbps (3) |
| USB | USB 2.0 + PHY (2) |
| Operating Temperature | 0°C ~ 125°C (TA) |
| Security Features | Cryptography, Random Number Generator |
| Mounting Type | Surface Mount |
| Package / Case | 689-BBGA Exposed Pad |
| Supplier Device Package | 689-TEPBGA II (31x31) |
| Additional Interfaces | DUART, I2C, MMC/SD, SPI |
| Base Product Number | P2020 |
Product Photos
For more product information, please download the PDF
