Product Details
SN65HVD1780DR Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tape & Reel (TR).It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 3.15V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~125°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 8 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number 65HVD1780 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.There are 1 transceivers in total implemented by this IC.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 6mA.At 2.75V, Wide receiver is able to deliver voltage to the load.
SN65HVD1780DR Features
Tape & Reel (TR) package
8 pin count
8 pins
SN65HVD1780DR Applications
There are a lot of Texas Instruments
SN65HVD1780DR Drivers/Receivers/Transceivers applications.
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver
Product Description
ansc Part #
ANSC- SN65HVD1780DR
Part#
SN65HVD1780DR
Type:
Integrated Circuits (ICs)
Manufactor
Texas Instruments
DC
new
Package / Case
Supplier Device Package
Tape & Reel (TR)
Cut Tape (CT)
Description
8 Terminations 5V 8 Pin 65HVD1780 Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions
Product Attributes
TYPE | DESCRIPTION |
---|---|
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers |
Mfr | Texas Instruments |
Series | - |
Package | Tape & Reel (TR)Cut Tape (CT) |
Product Status | Active |
Type | Transceiver |
Protocol | RS422, RS485 |
Number of Drivers/Receivers | 1/1 |
Duplex | Half |
Receiver Hysteresis | 50 mV |
Data Rate | 115Kbps |
Voltage - Supply | 3.15V ~ 5.5V |
Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | 8-SOIC |
Base Product Number | 65HVD1780 |
Actual image of the product