Product Details
ADG621BRMZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 10 terminations. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 10 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with ADG621 if you are looking for analog multiplexer variants. It has an internal resistance of 5.5Ohm. The functions of 10 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1nA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. In the case of dual power supplies, you should connect at least 2.7V. The transfer of data can be performed over 230MHz bandwidths.
ADG621BRMZ Features
2 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 230MHz
ADG621BRMZ Applications
There are a lot of Analog Devices Inc.
ADG621BRMZ Analog Switches & Multiplexers ICs applications.
Isolation
Medical
Imaging
Ultrasound
Audio and video switching
Automatic test equipment
Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Product Description
ansc Part # | ANSC- ADG621BRMZ |
Part# | ADG621BRMZ |
Type： | Integrated Circuits (ICs) |
Manufactor | Texas Instruments |
| DC | new |
Specifications
| TYPE | DESCRIPTION |
|---|---|
| Category | Integrated Circuits (ICs)InterfaceAnalog Switches, Multiplexers, Demultiplexers |
| Mfr | Analog Devices Inc. |
| Series | - |
| Package | Tube |
| Product Status | Active |
| Switch Circuit | SPST - NO |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 5.5Ohm |
| Channel-to-Channel Matching (ΔRon) | 250mOhm |
| Voltage - Supply, Single (V+) | 2.7V ~ 5.5V |
| Voltage - Supply, Dual (V±) | ±2.7V ~ 5.5V |
| Switch Time (Ton, Toff) (Max) | 120ns, 70ns |
| -3db Bandwidth | 230MHz |
| Charge Injection | 110pC |
| Channel Capacitance (CS(off), CD(off)) | 20pF, 20pF |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Crosstalk | -90dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
| Supplier Device Package | 10-MSOP |
| Base Product Number | ADG621 |
Actual image of the product
Product datasheet
For more information, please download
Payment&Transportation
Official Certificate&Certificate
Standard packaging
Multiple product supply
Welcome to visit our company
Warehouse Real Shot
